Items where Subject is "Engineering"

Article

Abel, U. V. Alintah- and Iheama, N. B. and Ugochukwu, S. C. (2020) Effect of Company Strategies on Organisational Performance in Nigerian Construction Industry. Journal of Engineering Research and Reports, 14 (4). pp. 25-33. ISSN 2582-2926

Adamo, Nasrat and Al-Ansari, Nadhir and Sissakian, Varoujan and Fahmi, Khalid Jehad and Abed, Salwan Ali (2022) Climate Change: Droughts and Increasing Desertification in the Middle East, with Special Reference to Iraq. Engineering, 14 (07). pp. 235-273. ISSN 1947-3931

Adeleke, J. S. and Wahab, A. B. and Olanipekun, E. A. (2020) Analysis of Energy and Cost Performance of Retrofitting Fluorescent Tubes with Compact Fluorescent and Light Emitting Diode Lamps. Journal of Engineering Research and Reports, 14 (4). pp. 34-46. ISSN 2582-2926

Adewumi, C. N. and James, J. O. and Ogwuda, U. A. (2024) Comparative Evaluation of the Physico-Chemical Characterization of Native and Modified Starches from Jackfruit, Corn and Cassava as Potential Additives in Drilling Fluid. Journal of Engineering Research and Reports, 26 (2). pp. 250-266. ISSN 2582-2926

Ahmed Roni, Nazmul and Sultana, Sharmin and Ibne Iqbal, Mian Md Jawad (2022) Investigation on Fire Protection System of Highrise Buildings in the Context of Bir Uttam Aminul Haque Avenue in Dhaka, Bangladesh. Engineering, 14 (08). pp. 301-319. ISSN 1947-3931

Ainah, Priye Kenneth and Ugemuge, Sunday (2024) Impact of Fault Resistance on Distance Relaying of Ahoada-Yenagoa Transmission Line Using Neplan. Journal of Engineering Research and Reports, 26 (4). pp. 73-84. ISSN 2582-2926

Azeem, Babar and Ullah, Zahid and Rehman, Faisal and Ali, Sahibzada Muhammad and Arif, Bilal and Haider, Aun (2019) Synchronous and a-synchronous machines (SAASMs): rotor and stator faults. Engineering and Applied Science Letters, 2 (2). pp. 1-9. ISSN 26179695

Bacquian, Bryan Christian and Gomez, Frederick Ray (2020) Effect of Backgrinding Tape Lamination on Die Alignment. Journal of Engineering Research and Reports, 14 (4). pp. 1-4. ISSN 2582-2926

Bedez, Maxime and Fasquelle, Thomas and Olejnik, Cécile (2019) How to create satisfying high-resolution microscope stitched pictures with limited resources? A simple method applied to cross-sections of teeth. Engineering and Applied Science Letters, 2 (3). pp. 30-39. ISSN 26179695

Chang, Zheng and Ma, Jing and Yuan, Kunpeng and Zheng, Jiongzhi and Wei, Bin and Al-Fahdi, Mohammed and Gao, Yufei and Zhang, Xiaoliang and Shao, Hezhu and Hu, Ming and Tang, Dawei (2022) Zintl Phase Compounds Mg3Sb2−xBix (x = 0, 1, and 2) Monolayers: Electronic, Phonon and Thermoelectric Properties From ab Initio Calculations. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Chen, Lei (2022) Backstepping-Based Distributed Abnormality Detection for Nolinear Parabolic Distributed Prameter Systems. Engineering, 14 (07). pp. 285-299. ISSN 1947-3931

Chikalov, Igor and Yao, Peggy and Moshkov, Mikhail and Latombe, Jean-Claude (2011) Learning Probabilistic Models of Hydrogen Bond Stability from Molecular Dynamics Simulation Trajectories. Journal of Intelligent Learning Systems and Applications, 03 (03). pp. 155-170. ISSN 2150-8402

Damene, Mitiku and Koyas, Kidane and Gebregiorgis, Solomon (2020) Coupled coincidence and coupled common fixed point theorem in dislocated quasi metric space. Engineering and Applied Science Letters, 3 (4). pp. 11-18. ISSN 26179695

Domroes, Frank and Krewet, Carsten and Kuhlenkoetter, Bernd (2013) Application and Analysis of Force Control Strategies to Deburring and Grinding. Modern Mechanical Engineering, 03 (02). pp. 11-18. ISSN 2164-0165

Faghihi, Usef and Fournier-Viger, Philippe and Nkambou, Roger and Poirier, Pierre (2011) Identifying Causes Helps a Tutoring System to Better Adapt to Learners during Training Sessions. Journal of Intelligent Learning Systems and Applications, 03 (03). pp. 139-154. ISSN 2150-8402

Fan, Bin and Song, Xiaona (2024) A Review of Deep Learning Based Object Detection Algorithms. Journal of Engineering Research and Reports, 26 (11). pp. 88-99. ISSN 2582-2926

Farrokhsiar, Morteza and Najjaran, Homayoun (2011) A Velocity-Based Rao-Blackwellized Particle Filter Approach to Monocular vSLAM. Journal of Intelligent Learning Systems and Applications, 03 (03). pp. 113-121. ISSN 2150-8402

Filippov, Leonid (2016) On a Heuristic Point of View Concerning the Mechanics and Electrodynamics of Moving Bodies. World Journal of Mechanics, 06 (09). pp. 305-322. ISSN 2160-049X

Ghiasi, Emran Khoshrouye and Noeiaghdam, Samad (2020) Truncating the series expansion for unsteady velocity-dependent Eyring-Powell fluid. Engineering and Applied Science Letters, 3 (4). pp. 28-34. ISSN 26179695

Ghiasi, Emran Khoshrouye and Saleh, Reza (2019) HBA analysis of generalized viscoelastic fluids. Engineering and Applied Science Letters, 2 (3). pp. 7-13. ISSN 26179695

Gomez, Frederick Ray I. and Rodriguez, Rennier S. (2020) Metallized Semiconductor Die for Long Wire Interconnect. Journal of Engineering Research and Reports, 14 (4). pp. 20-24. ISSN 2582-2926

Guo, Shuaihui and Yan, Zhangming (2024) Experimental Multi-dimensional Study on Corrosion Resistance of Inorganic Phosphate Coatings on 17-4PH Stainless Steel. Journal of Engineering Research and Reports, 26 (8). pp. 101-111. ISSN 2582-2926

Gururaj, Asha and Kumar, B. Manoj (2021) Wastewater Treatment of Wet Coffee Processing in an Anaerobic Sequencing Batch Reactor Pretreated with Electro Coagulation. Journal of Engineering Research and Reports, 20 (11). pp. 41-51. ISSN 2582-2926

Hassan, N. J. and Pourdarvish, A. and Sadeghi, J. (2016) The Harmonic Oscillator with Random Damping in Non-Markovian Thermal Bath. World Journal of Mechanics, 06 (08). pp. 238-248. ISSN 2160-049X

Hsieh, Chi-Chang and Hung, Chih-Ching and Li, Yan-Huei (2013) Investigation of a Pressure Sensor with Temperature Compensation Using Two Concentric Wheatstone-Bridge Circuits. Modern Mechanical Engineering, 03 (02). pp. 104-113. ISSN 2164-0165

Imbert, Axel and L’Hostis, Gildas and Rigel, David Rigel and Laurent, Fabrice and Durand, Bernard (2013) Thermal Activation of Asymetrical Composites for Vibration Control. Modern Mechanical Engineering, 03 (03). pp. 1-8. ISSN 2164-0165

Kan, Ee-May and Lim, Meng-Hiot and Yeo, Swee-Ping and Ho, Jiun-Sien and Shao, Zhenhai (2011) Contour Based Path Planning with B-Spline Trajectory Generation for Unmanned Aerial Vehicles (UAVs) over Hostile Terrain. Journal of Intelligent Learning Systems and Applications, 03 (03). pp. 122-130. ISSN 2150-8402

Katori, Hiroaki (2016) Determination of Shear Center of Arbitrary Cross-Section. World Journal of Mechanics, 06 (08). pp. 249-256. ISSN 2160-049X

Kerunwa, Anthony and Anyadiegwu, Charley I.C. and Okoro, Innocent Chijioke and Nwachukwu, Angela Nkechinyere and Obibuike, Ubanozie Julian and Dike, Chukwuebuka Francis and Udechukwu, Matthew Chidubem (2024) Development of Model and Graphical User Interface for Leak Localization in Crude Oil Pipeline. Journal of Engineering Research and Reports, 26 (10). pp. 13-26. ISSN 2582-2926

Khinvasara, Tushar and Shankar, Abhishek and Wong, Connor (2024) Survey of Artificial Intelligence for Automated Regulatory Compliance Tracking. Journal of Engineering Research and Reports, 26 (7). pp. 390-406. ISSN 2582-2926

Kholmirzaev, Farhod and Yusupova, Maftuna and Kayumov, Abdul-Malik and Sarimsakov, Olimjon (2022) About the Change in Air Pressure in the Pipeline during the Pneumatic Transportation of Cotton. Engineering, 14 (07). pp. 228-234. ISSN 1947-3931

Li, Ming-Huang (2022) CMOS-MEMS Oscillator Architecture and Phase Noise: A Mini-Review. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Li, Zaihua and Yan, Huan and Song, Yunting and Guo, Jincheng (2017) Study on Short Circuit Current Calculation of Power System with UHVDC and New Energy Source. Energy and Power Engineering, 09 (04). pp. 625-634. ISSN 1949-243X

Lissner, Jonah (2020) Quantum mechanical methods for advancement of hydrophysical engineering. Engineering and Applied Science Letters, 3 (4). pp. 55-59. ISSN 26179695

Liu, Fang and Pan, Yi and Yang, Junfeng and Luo, Zhiqiang and Liu, Lihua (2017) Unit Commitment under the Environment of Wind Power and Large-Scale Bilateral Transactions. Energy and Power Engineering, 09 (04). pp. 611-624. ISSN 1949-243X

Liu, Qingnian and Shao, Yingfeng and Li, Long and Cai, Yong and Song, Fan (2022) Uniformity Prediction of Bending Stiffness of Composite Space Mirrors With Ply Angle Misalignments by Deflection Angle. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Ma, Xiaoqian and Lu, Jiayu and He, Kun and Gao, Wensheng (2017) Research on Total Electric Field for DC Lines Converted from Double-Circuit AC Lines. Energy and Power Engineering, 09 (04). pp. 598-610. ISSN 1949-243X

Mariano, Richard G. and Maniebo, Marciano M. and Gomez, Frederick Ray I. (2021) Enhanced Ball Shear Testing Configuration For Substrate LGA Sensor Devices. Journal of Engineering Research and Reports, 20 (11). pp. 69-73. ISSN 2582-2926

Matsumoto, Hirono and Kubota, Yoshihiro and Ohishi, Masayuki and Mochizuki, Osamu (2016) Drag on a Cylinder with an Apple-Shaped Cross Section. World Journal of Mechanics, 06 (09). pp. 323-339. ISSN 2160-049X

Mbachu, Frank C. and Nwaogazie, Ify L. (2023) Modelling and Prediction of Water Quality Index of Selected Pond Water in Aboh Mbaise Local Government Area, Imo State, Nigeria. Journal of Engineering Research and Reports, 25 (11). pp. 13-21. ISSN 2582-2926

Mbiakouo-Djomo, Eric Flavien and Odi-Enyegue, Timothée Thierry and Abanda, André and Tchemou, Gilbert and Djiofack-Tiagho, Ulrich Florin and Tcheukam-Toko, Denis and Réné, Ngouffo Koukougnang and Fokwa, Didier and Njeugna, Ebénézer (2022) Determination of a Mathematical Model of Erosion Taking into Account the Intensity of Rainfall and Soil Slopes from the Global MNT Model. Engineering, 14 (07). pp. 274-284. ISSN 1947-3931

Mudashiru, L. O. and Babatunde, I. A. and Adetola, S. O. and Kolapo, O. I. (2021) Evaluation of Mechanical and Microstructural Properties of Al-SiC/Gr Particulate Produced by Stir Casting Technique. Journal of Engineering Research and Reports, 20 (11). pp. 18-24. ISSN 2582-2926

Nabil, Mohamed and Essa, Ashraf and Mahmoud, Magdy and Rabah, Mohamed (2021) Effect of Rice Husk Ash (RHA) and Slag as Partial Replacement of Cement on Reinforced Concrete Slabs. Journal of Engineering Research and Reports, 20 (11). pp. 34-40. ISSN 2582-2926

Olatubosun, A. and Olabisi, Patrick O. (2018) An Improved Logistic Function for Mapping Raw Scores of Perceptual Evaluation of Speech Quality (PESQ). Journal of Engineering Research and Reports, 3 (1). pp. 1-10. ISSN 2582-2926

Owuna, F. J. and Dabai, M. U. and Sokoto, M. A. and Faruq, U. Z. and Abubakar, A. L. (2018) Formulation of Lubricant from Calabash Seed Oil. Journal of Engineering Research and Reports, 3 (1). pp. 1-8. ISSN 2582-2926

Pan, Weiwei and Miu, Shoucheng and Yu, Guangkai and Wu, Tian and Zhang, Bo (2017) Measurement and Simulation of Induced Voltage and Current on 110 KV Crossing Transmission Lines under UHV AC Transmission Lines. Energy and Power Engineering, 09 (04). pp. 635-643. ISSN 1949-243X

Peter, Ogundola Ilesanmi (2023) Industrial Ergonomics of Manufacturing Industries in South West Nigeria. Journal of Engineering Research and Reports, 25 (4). pp. 79-90. ISSN 2582-2926

Raphael, Akinyemi Oluwaseyi and Gideon, Olaiya Niyi (2018) Analysis of the Synthetic Gas Production from Saw Dust Gasification. Journal of Engineering Research and Reports, 3 (1). pp. 1-11. ISSN 2582-2926

Rosa, Rogel Dela and Dinglasan, Jerome J. and Gomez, Frederick Ray (2021) Digital Exhaust Controller for Pressure Detection on Die Attach Oven Curing Machine. Journal of Engineering Research and Reports, 20 (11). pp. 62-68. ISSN 2582-2926

Rossi, Luca and Bianchi, Giulia (2024) Sustainable Solutions: Integrating Renewable Energy and Electric Vehicles for Cleaner Operations. Journal of Energy Research and Reviews, 16 (3). pp. 52-63. ISSN 2581-8368

Sahir, Muhammad Jibril Shahab (2020) Uniformity of dynamic inequalities constituted on time Scales. Engineering and Applied Science Letters, 3 (4). pp. 19-27. ISSN 26179695

Santos, Marcos Daniel Souza dos and Lima, Daniel Valença Fiuza and Carmona, Jorge Eliécer Campuzano and Avila, Suzana Moreira and Carvalho, Graciela Nora Doz de (2013) Vibration Control of a Gym Floor Using Tuned Mass Dampers: A Numerical Analysis. Modern Mechanical Engineering, 03 (03). pp. 9-16. ISSN 2164-0165

Santosa, Budi and Budiman, Muhammad Arif and Wiratno, Stefanus Eko (2011) A Cross Entropy-Genetic Algorithm for m-Machines No-Wait Job-ShopScheduling Problem. Journal of Intelligent Learning Systems and Applications, 03 (03). pp. 171-180. ISSN 2150-8402

Shittu, Rasheed Ayofe and Titiladunayo, Isaac Femi (2018) Experimental Investigation of the Performance and Energy Consumption of an Automated Ice-cube Making Machine. Journal of Engineering Research and Reports, 3 (1). pp. 1-12. ISSN 2582-2926

Sobamowo, G. M. and Kamiyo, O. M. and Salami, M. O. and Yinusa, A. A. (2019) Exploration of the effects of fin geometry and material properties on thermal performance of convective-radiative moving fins. Engineering and Applied Science Letters, 2 (3). pp. 14-29. ISSN 26179695

Sobamowo, M. G. (2020) Transient free convection heat and mass transfer of Casson nanofluid over a vertical porous plate subjected to magnetic field and thermal radiation. Engineering and Applied Science Letters, 3 (4). pp. 35-54. ISSN 26179695

Sumagpang Jr, Antonio R. and Gomez, Frederick Ray I. (2018) Line Stressing Critical Processes Optimization of Scalable Package Passive Device for Successful Production Ramp-up. Journal of Engineering Research and Reports, 3 (1). pp. 1-13. ISSN 2582-2926

Thomas, Akyen and Kankam, Charles Kwame and Awine, Nnaa Kelvin (2023) Assessing the Influence of Variations in Chemical Composition of Cement Brands in Ghana on their Setting and Workability of Concrete. Journal of Engineering Research and Reports, 25 (3). pp. 49-58. ISSN 2582-2926

Tuzcu, Ilhan (2016) Vibration Control Using Heat Actuators. World Journal of Mechanics, 06 (08). pp. 223-237. ISSN 2160-049X

Ucheoma, I. T. and Chilakpu, K. O. and Nwakuba, N. R. and Ezeanya, N. C. (2020) Performance Study of a Developed Automated Cooking System. Journal of Engineering Research and Reports, 14 (4). pp. 5-19. ISSN 2582-2926

Ugur, Buse and Ozkan, Uğur and Sahin, Halil Turgut (2024) Effects of Microwave Treatment on Alkyd-Varnished Wood Exposed to Outdoor Conditions. Journal of Engineering Research and Reports, 26 (10). pp. 323-334. ISSN 2582-2926

Verga, Adam S. and Tucker, Sarah Jo and Gao, Yuming and Plaskett, Alena M. and Hollister, Scott J. (2022) Nonlinear Viscoelastic Properties of 3D-Printed Tissue Mimicking Materials and Metrics to Determine the Best Printed Material Match to Tissue Mechanical Behavior. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Wardle, Frank and Minton, Timothy and Ghani, Saiful Bin Che and Fϋrstmann, Paul and Roeder, Martin and Richarz, Sebastian and Sammler, Fiona (2013) Artificial Neural Networks for Controlling the Temperature of Internally Cooled Turning Tools. Modern Mechanical Engineering, 03 (02). pp. 1-10. ISSN 2164-0165

Willert, Emanuel (2022) Influence of Wear Profile Geometry on Critical Plane Fatigue Crack Initiation Criteria in Plane and Axisymmetric Elastic Fretting Contacts. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Yang, Si and Jiang, Zhongfu and Li, Shan and Li, Wenbo and Liu, Guojing and Cao, Xiangyang and Wang, Nan and Zhang, Lina (2017) Synergetic Dispatch of Power System with Integration of Large-Scale Renewable Energy. Energy and Power Engineering, 09 (04). pp. 589-597. ISSN 1949-243X

Yinusa, A. A. and Sobamowo, M. G. and Adelaja, A. O. (2019) Determination of the dynamic shearing force and bending moment of a tensioned single-walled carbon nanotube subjected to a uniformly distributed external pressure. Engineering and Applied Science Letters, 2 (3). pp. 40-52. ISSN 26179695

Zhang, Hanhong (2022) Fault Detection for a One-Dimensional Wave PDE System. Engineering, 14 (07). pp. 217-227. ISSN 1947-3931

Zhang, Yuying (2024) A Comprehensive Review on Water Permeability Testing and Sealing Techniques in Concrete Construction. Journal of Engineering Research and Reports, 26 (4). pp. 67-72. ISSN 2582-2926

Book Section

Abyzov, Vadym (2021) The Main Factors, Modern Conditions and Directions of the Creation of Architectural Environment. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 10-23. ISBN 978-93-90768-48-6

Ali, Safeer Ali Abbas and Arun, C. and Krishnamurthy, K. (2021) Waste Data Processing Algorithm and Data Collection Integration System (DCIS) in Singular Construction Activities for Aiding the Quantification of Overruns in Construction Process. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 147-162. ISBN 978-93-90888-71-9

Arsana, M. E. and Kusuma, I. G. B. Wijaya and Sucipta, M. and Suamir, I. N. (2021) Thermodynamic Analysis of Two-Phase Ejector as Expansion Device with Dual Evaporator Temperatures on Split Type Air Conditioning Systems: An Advance Study. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 135-146. ISBN 978-93-90888-71-9

Arunkumar, G. and Premanand, S. and Pandiyan, A. (2021) Design of Compliant Mechanisms for Engineering Support - A Topology Optimisation Approach. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 160-171. ISBN 978-93-90768-15-8

Asadullah, Mohammed and Khan, S. A. and Asrar, Waqar and Sulaeman, E. and Quadri, Syed Azam Pasha (2021) Effect of Rotating Cylinder at Variable Location to Control Base Flows at Mach 2. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 123-134. ISBN 978-93-90888-71-9

Chapman, Zachary and Doom, Jeffrey (2024) Exploring Spray Nozzle Performance through Computational Fluid Dynamics with Pulse-Width Modulation. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 130-148. ISBN 978-81-969723-0-1

Dwivedi, Yagya Dutta (2020) Environment Friendly Magneto Hydro Dynamic Generator. In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3

Ekambaram, Rajasekaran and Rajasekaran, Indupriya (2020) Nano Level Force in Protein Plays Applications of Maximum Untold Understanding of Life Form. In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3

Fei, Chengwei and Han, Lei and Lu, Cheng and Hu, Yan and Huang, Bo and Yuan, Liu (2021) Probabilistic Fatigue Assessment for Complex Engineering Structures with Time-dependent Surrogate Modelling. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 35-64. ISBN 978-93-90768-48-6

Fernández-Ordóñez, Yolanda M. and Soria-Ruiz, Jesús and Ovando-Brito, Luis Alberto (2020) Recent Approach on a Software (MP-GEO) Process Framework for Guiding the Specification of Geospatial Databases in the Cloud. In: Recent Developments in Engineering Research Vol. 7. B P International, pp. 1-13. ISBN 978-93-90431-19-9

Foidas, Ion and Stefanescu, Dan-Paul and Serbancea, Mihai (2021) A Recent Advancement: Casing while Drilling – A Viable Alternative to Conventional Drilling. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 24-34. ISBN 978-93-90768-48-6

Indumathi, L. K. (2024) Extended Open-flow Technique for Reducing Handover Latency of PMIPv6. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 173-182. ISBN 978-81-971164-7-6

Jeyaprabha, T. J. and Sumathi, G. and Abijith, A. and Guruprasanth, K. and Thillaiganesh, Chiranjeevraja (2020) Studies on the Implementation of Remote Patient Monitoring Using Wireless Pulse Oximeter. In: Recent Developments in Engineering Research Vol. 7. B P International, pp. 14-27. ISBN 978-93-90431-19-9

K., Suresh and K., Selvam and B., Karunanithi (2024) Computational Fluid Dynamics Studies on the Impact of Viscosity and flow rate of Dope Solution in Hollow Fiber Ultra Filtration Membrane Formation. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 117-129. ISBN 978-81-969723-0-1

Karmanov, V. V. and Kameneva, A. L. (2021) Influence of Tool Force on Microstructure and Mechanical Properties in AA2024-O Alloy during Friction Stir Welding. In: New Approaches in Engineering Research Vol. 5. B P International, pp. 1-6. ISBN 978-93-91312-97-8

Kelly, James M. (2023) Shear Deformation and the Buckling of Columns, Revisited. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 94-110. ISBN 978-81-967636-2-6

Lwisa, Essa Georges and Abdulkhalek, Ashrakat R. (2021) An Experimental Approach to Enhanced Oil Recovery by Nitrogen and Carbon Dioxide Injection Followed by Low Salinity Water Flooding for Tight Carbonate Reservoir. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 143-151. ISBN 978-93-90768-15-8

Popovic, Ljubivoje M. (2024) Study about Effective Metal Shield(s) of High Voltage Distribution Cable Lines. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 169-193. ISBN 978-81-969723-0-1

Rahman, Ishita Mouri (2021) Linkage between Traditional Architectural Elements in South Asia Representing Regionalism and Achieving Salutogenesis. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 1-9. ISBN 978-93-90768-48-6

Rameshappa, Basavarajappa Sokke and Shadaksharappa, Nagaraj Mudakapla (2024) Enhancing Load Frequency Control in a Four-Area Power System Network with an Optimal ANN Controller. In: Theory and Applications of Engineering Research Vol. 4. B P International, pp. 149-168. ISBN 978-81-969723-0-1

Sadovich, Mark A. and Shlyakhtina, Tatyana F. and Ginzburg, Sofia M. and Yudelevich, Alexander M. (2023) Overview of High 120 m Concrete Dam Bratsk Hydroelectric Power Plant: A Recent Perspectives. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 111-126. ISBN 978-81-967636-2-6

Sakly, Houneida and Said, Mourad and Tagina, Moncef (2020) Computational Modelling of Forces Acting on the Femur Bone: Stress Analysis in CFD Modules with Parallel Processing. In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3

Sathawane, Saurabh and Belsare, A. D. and Deshpande, Vaibhav and Warade, Snehal and Thakre, Tanay (2024) Assessment of Voice Controlled Industrial Parameters Monitoring and Controlling System: An Update. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 160-172. ISBN 978-81-971164-7-6

Squire, James C. and Sullivan, Gerald A. and Brooke, George M. (2023) Correlation of Hardware Demonstrations and Student Understanding. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 85-93. ISBN 978-81-967636-2-6

Suresh, M. and Rahul, B. and Srinivasan, Sharan and Krishna, Vinaya (2021) Recent Advancements in Numerical Investigations on Enhancement of Bi-evaporator Compression Refrigeration System Using Ejector as Expansion Device. In: Advanced Aspects of Engineering Research Vol. 2. B P International, pp. 152-159. ISBN 978-93-90768-15-8

Thirumalai, R. and Gobinath, S. and Babu, S. Suresh (2020) Assessing the Behavior of Steel Concrete Composite Columns under Lateral Load. In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3

Zaharescu, Maria and Mihaiu, Susana and Vladut, Cristina Maria and Tenea, Ecaterina and Preda, Silviu and Calderόn-Moreno, José María and Anastasescu, Mihai and Stroescu, Hermine and Atkinson, Irina and Apostol, Nicoleta and Moldovan, Carmen and Gartner, Mariuca (2020) Sol-Gel and Hydrothermal Derived Mn-doped ZnO Films with Optical and Piezoelectric Properties. In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3